Analyzing the explosive path of new flat die products

It is good to analyze the explosive path of new flat die products, as we all know that biomass fuel really explains the value of biomass life. So why is biomass fuel so hot and dust-free, and the cleaning before the crushed material enters the gas valve.

Why is biomass fuel so hot that it leans towards the cleanliness of heating material A? If this compression ratio is fully automatic, is it higher; If it is pure electric, it indicates that the compression ratio is of clinker, but this compression ratio is different because they are all efficient and efficient biomass fuels with centrifugation. The compression ratio is different. If the particles have the same mass, the compression ratio should be the same. For example, the heat of biomass fuel has a different compression ratio, usually the same in summer and autumn. The heat of biomass Pellet fuel is relatively low, but once there is a failure, the compression ratio will become larger, and it can not let people carry out smoothly at the same time. It can only let people get effective improvement in technology. The heat of biomass Pellet fuel is generally different, which has not only been greatly improved in technology, but also has great use in transportation.

Biomass Ethanol fuel 1. The purity of biomass fuel is high, and it does not contain other impurities that do not generate heat. Its carbon content is 75-85%, ash content is 3-3%, and water content is 1-3%, and it will not have cracks, cracks, and other phenomena.

Biomass fuel undergoes delicate processing procedures, and the crushing fineness must be controlled within 3-6mm, which can significantly reduce water content, improve molding rate, and increase fuel molding rate. Therefore, biomass fuel is the main ideal fuel for granulation.

Biomass Pellet fuel is a kind of equipment that uses eucalyptus, pine, birch, poplar, fruit wood, crop straw and bamboo chips to crush into sawdust bran to process biomass fuel. Effectively solving the shortcomings of difficult granulation and poor effect of coarse fibers, adopting international advanced manufacturing processes, customizing high-quality molds for various particle machines, prolonging equipment life, improving product quality, and reducing per ton consumption costs. The main transmission of the sawdust particle machine adopts high-precision gear transmission, and the ring mold adopts a quick release type clamp type. The transmission part of the entire machine adopts high-quality bearings from Switzerland and Japan to ensure transmission, stability, and low noise. The ring mold adopts a quick release type clamp type, and the feeding adopts frequency conversion speed regulation to ensure uniform feeding. The door cover is equipped with a compensation type snake spring coupling of a certain international advanced level, which has a novel, compact, safe, and low noise structure Low fault performance. Adopting international advanced manufacturing technology, high-quality molds for various raw materials can be customized for your various particle machines, extending the service life of your equipment, improving product quality, and reducing ton consumption costs