The latest flat die product exhibition is about to start, don't you know

The latest flat die product exhibition is about to start, don't you know yet? The forward and reverse direction is more suitable for the complete set of equipment for processing aquatic feed, high-end aquatic products, high-end biology and other types of feed.

First, the cleaning amount of particles is made by steam die-casting, and the harvesting rate is high; Secondly, in order to make the cylinder air fresher and ensure the normal operation of the cylinder environment, the following hours can be selected in the first minute to ensure the normal operation of production.

The cleaning of particles can effectively solve the odor on the cylinder, thereby improving production efficiency, reducing logging rate, and improving the efficiency of logging work.

In the depths of winter, drivers can make various types of straw, sawdust, sawdust, shavings, and wood scraps, with various models available for selection.

For materials that are frequently worn out, dehumidification and refueling of the iron removal device should be carried out to make the materials more cohesive at low temperatures.

Ring mold granulator, composite fertilizer equipment, mainly including crushers, horizontal mixers, ring mold granulators, crushers, dryers, cooling machines, packaging machines, and other equipment. At this point, the research and development of the particle machine is not yet mature enough, and the most important thing is that the biomass particle machine of the particle machine has not been found to be usable. Therefore, the installation of the particle machine requires frequent inspection to see if there is any blockage, or to repair the site, replace accessories, repair the grading screen, sand dragon, and finished product warehouse. If there is no drilling additive in the granulation room, the machine should be dismantled, connected to pipelines, transmission wheels, ring mold wheels, and supporting equipment. The granulation machine is equipped with fixed devices, When we dismantle and assemble equipment, the production capacity is usually around 1000 hours. The original design of Bolakli in Xinjiang installed multiple swarm dragons, which required installation, support wheels, and racks, or a fracture layer. The fixed support wheels and a large support mechanism were used during installation, and it had to go through our livestock breeding farm to clear the problem. The next process is to sprinkle the hopper.

When installing and using biomass pellet machines, we strictly follow certain steps to ensure that each new equipment achieves its objectives.

When installing the biomass pellet machine, we mainly use raw materials to press biomass materials or metals and waste materials into particles so as to store more energy, so as to complete the processing of biomass Pellet fuel under the storage of the pellet machine.

When installing the biomass pellet machine, we mainly use agricultural and forestry processing wastes such as sawdust, straw, rice husk, bark and other biomass as raw materials, through pretreatment and processing, solidify them into high-density Pellet fuel, which is an ideal fuel to replace kerosene.

Brief Introduction of Sawdust Granulator The sawdust granulator produced by the company absorbs the essence of domestic and foreign granulators. The heart part is a "two-layer mold" with unique assembly structure, and the "pressing wheel" is refined from high alloy wear-resistant materials, with unique design, reasonable structure, energy reduction, long life and other characteristics; It has filled the gap in vertical feeding of national environmental mold granulation and reached the international advanced level.