The industry is facing a cold spell, and the roller shell industry is actively engaging in a price war

The industry is facing a cold spell, and the roller shell industry is actively engaged in a price war, with the biomass particle industry mainly focusing on vulnerable parts.

With the arrival of the Second Industrial Revolution and the rapid growth of the global economy, people have a demand for the market, and the demand for tailored drugs is also increasing. But the last thing we can't consume is the biomass pellet machines that we haven't heard of yet, including fruit shell pellet machines, straw pellet machines, cotton stalks, corn stalks, wheat stalks, sawdust, rice husks, peanut shells, palm shreds, medicine residue, and so on. This type of granulator is mainly suitable for coarse fiber granulation, and can also be used for micro crushing granulation.

Biomass pellet machines are divided into flat model biomass pellet machines and circular model biomass pellet machines. The ring mold biomass pellet machine uses pressure rollers and ring molds to perform cold dense molding processing on crushed biomass straw, forestry waste, and other raw materials under normal temperature conditions. The density of raw materials is generally 01-013t/m3, and the particle density after molding is 11-13t/m3, which is convenient for storage and transportation and greatly improves the combustion performance of biomass.

The working process of the biomass pellet machine requires materials with a moisture content of 13%~17% to enter the quantitative conveyor from the storage bin. The appropriate material flow rate is obtained through the variable frequency speed control motor of the quantitative conveyor, and then enters the conditioner. Then, it enters the forced feeder and enters the compression chamber for granulation.

Biomass pellet machine 1. Biomass pellet machine can have the characteristic of average value in each biomass pellet machine, so of course, there should be sufficient dry material available, and this principle should not be ignored. Before use, the biomass pellet machine should be properly dried to avoid unnecessary trouble, and do not tell others that there are many types of feed raw materials in the 1 pellet machine: vertical ring model biomass pellet machine, horizontal ring model biomass pellet machine Vertical circular model biomass pellet machine; According to the fact that there is no sawdust in the raw materials and only the remaining raw materials, it is difficult to handle particles if they are crushed at a temperature of -80 ° C. Therefore, we need to carry out impurity removal work on these raw materials.

The raw materials for the production of particles by biomass pellet machine are mainly agricultural and forestry processing straw, forestry waste, crop straw, sawdust, biomass and other biomass as raw materials. Through pretreatment and processing, they are solidified into high-density Pellet fuel, which is an ideal fuel to replace kerosene. It can save energy and reduce emissions, and has good economic and social benefits. It is a clean and renewable energy source.

The principle of biomass particle granulation process: The raw materials are completed using a flat mold particle machine and a ring mold particle machine. The particle granulation process is completed by a compressed shape particle machine, which has high efficiency and stability. However, sometimes due to the limitation of finished product moisture, the particles are prone to heat and produce white matter during combustion, resulting in cheap heating particles and odor, thereby reducing their lifespan.

● Different raw materials should have different characteristics: corn straw particles, peanut shells, bean shells, rice husks, straw, sawdust, Used coffee grounds, palm shells and "pure lignin" work of "two or one layer": the gap between gear boxes is between 01 mm and 03 mm, and one part is partial.