Please pay attention to the risks of flat die trading

Please be sure to pay attention to the risks of flat die trading. There is a good market, but how can we know if there is a good market for exports? Now let's cooperate with Gongyi Xiaoyi Mingyang Machinery Factory.

Chengyang Machinery Factory is a professional large-scale feed granulator production line equipment. The feed granulator here is equipped with very professional technical personnel, who can cut our use or purchase feed granules. Through domestic professional equipment production equipment, it can be used without stopping the machine.

The ring mold granulator is approved, but compared to the horizontal ring mold granulator, if the frequent faults occur, they need to be solved. So how to solve this problem?

The particles produced by the straw pellet machine can produce fuel that is relatively dry and cannot be ignited immediately. This phenomenon can occur when the atmosphere generated enters the furnace. If the fuel situation is large, this situation occurs. Therefore, the straw pellet machine is very popular in this regard. However, due to the different working principles of the straw pellet machine, many cracks appeared, indicating the pressure in the pellet machine industry.

The component types and advantages of the straw granulator: 1. The lubrication part of the pressure roller of the granulator is obtained through the extrusion of the screw belt and ring mold of the assembly parts. This rolling lubrication method has a lower linear speed on the bearings and pressure rollers, making it more suitable for pressing and difficult to adhere. However, if such a fault exists, it can cause greater pressure inside the material warehouse, between the pressure roller and the ring mold. 2. The pressure roller of the particle machine is forged with alloy steel; 2. When in use, the raw materials should enter the granulation chamber through a screw rotating distributor and be polished through the limiting chamber to obtain corresponding quenching.

After the components of the straw granulator are made, the diameter of the pressure roller can be increased to the diameter of the ring mold, which increases the output of the straw granulator.

When preparing for the work of the straw granulator, we need to see the operating status of the straw granulator, which can improve the production efficiency of the straw granulator. However, this can lead to a large amount of maintenance investment in the long-term use of the equipment, so we must express very detailed requirements to you.

Straw pellet machine mainly uses biomass from agricultural and forestry processing such as sawdust, straw, rice husk, bark and other biomass as raw materials. Through pretreatment and processing, it can be solidified into high-density Pellet fuel, which is a new type of biomass fuel,

Straw pellet machines are divided into flat mold pellet machines and ring mold pellet machines. Flat die granulator is suitable for pressing materials that are difficult to be bonded and shaped, such as rice husks, Sunflower seed shells, peanut shells and other melon shells; Various wood scraps such as branches, tree stems, bark, etc; Various crop straw; Various chemical raw materials such as rubber, cement, ash, etc. Applied in feed factories, wood processing factories, fuel factories, fertilizer factories, chemical factories, etc., it is the most ideal compression and densification molding equipment with low investment, fast efficiency, and no risk.