Meeting Chinese manufacturers of flat dies at a German exhibition

Meet a Chinese manufacturer of flat dies at a German exhibition.

Fill in chicken feed and transport biomass raw materials while appropriately adjusting the movement of core components to improve production efficiency.

The straw granulator is currently one of the commonly used straw granulators in China. Its emergence has made it widely used, operated, stored, and transported in rural areas.

The main functions of this machine manufacturer are twofold, which can be used for various crop waste such as corn straw, peanut shells, rice straw, cotton stalks, wheat stalks, weeds, etc. In rural areas, the main use of granular materials is small, and the yield can be relatively high, especially our feed granular machine

This product is suitable for materials that are difficult to press, bond, and shape. Such as: rice hull, Sunflower seed hull, peanut hull, and other melon shells; Various wood scraps such as branches, tree stems, bark, etc; Various crop straw; Various chemical raw materials such as rubber, cement, ash, etc. Applied in feed factories, wood processing factories, fuel factories, fertilizer factories, chemical factories, etc., it is the most ideal compression and densification molding equipment with low investment, fast efficiency, and no risk.

Advantages: 1. Simple particle forming, suitable for coarse fiber and difficult to form materials, suitable for power plants, food factories, chemical factories, wood processing factories, fuel factories, fertilizer factories, chemical factories, etc. It is the most ideal compression and dense forming equipment with low investment, fast efficiency, and no risk.

Difficulty in particle forming, due to improper gap between the pressure roller and the ring mold, resulting in low production and long working hours for workers in different environments.

Advantages: 1. The pressure roller is severely worn, resulting in low production; The pressure roller is severely worn, which accounts for over 30% of cleaning work.

Advantage: When the staff were working as a beneficiation plant customer, we conducted a detailed investigation: if this model was purchased by us, a special difference made it clear to us that the product is suitable as a ton condition.

Advantages: 1. The pressure roller is severely worn, and the service life of this method is 3-5 times that of similar products. Of course, this method has been reduced, and we can strengthen it in the future.

Advantages: 1. When the pressure roller encounters the ring mold, it needs to age, so as not to cause this situation. However, if it is in use, this situation needs to be compared multiple times, and this method will not loosen. It is sufficient for inspection.

Advantages: 1. The pressure roller is severely worn, and this method absolutely cannot cause any damage to the ring mold. It only causes hard wear, which can be ineffective.

Advantages: 1. Pressure roller wear, which is relatively light and generally does not occur, but if this situation occurs, there will be two types of wear, namely frequency wear and axle wear.

Advantage: 1. The wear of the pressure roller is a very difficult moment, why does this happen?

Form: The mold life of the sawdust particle machine requires a large amount of Niagara's more than ten years, and dozens of rounds of challenges have been held in Niagara, Africa, in the first and second levels.