Inventory common flat dies

The ring mold is used for producing animal feed, biomass pellets, poultry feed, livestock feed, ruminant feed, aquatic feed, etc.

The design of the ring mold varies according to the needs of the customer. If you have any other requests, we will contact you free of charge for your promotional items.

The pellet feed machine is specifically designed for biomass pellet machines. Please consider the following information at all levels.

The pellet feed machine is mainly aimed at the production of biomass pellet machines. Part of it uses biomass pellet machines, including crop straw, sawdust, wood bran, wood powder, sawdust, rice husk, peanut husk, bark, etc. as raw materials, and the part that produces pellets is used as feed output.

The support shaft used in combination with the wheel is mainly composed of machine bearings, oil seals, faults, organizational supports, and screens for composting, industrial boilers, breeding livestock and poultry, aquatic products, hops, building templates, roller shells, spindles, gasification, woodworking, and hoops.

The main transmission adopts high-precision gear transmission, and the ring mold adopts a quick release clamp type, which increases the output by about 20% compared to the belt transmission type.

The transmission part of the entire machine adopts high-quality imported bearings and oil seals to ensure efficient, stable, and low noise transmission.

The internationally advanced compensated serpentine spring coupling has novel, compact, safe, and low fault performance.

On the basis of traditional granulation machines, the working intensity of the main working parts is strengthened in terms of materials, heat treatment, and other processes to meet the granulation requirements of biomass particles.

The raw materials of the granulator mainly consist of feeding, stirring, granulation, transmission, and lubrication systems. These components are all composed of adjustable speed motors, pressure rollers, ring molds, pressure rollers, ring molds, etc.

The working process of the granulator requires materials with a moisture content of 13%~17% to enter the quantitative conveyor from the storage bin. The appropriate material flow rate is obtained through the variable frequency speed control motor of the quantitative conveyor, and then enters the conditioner. Then, it enters the forced feeder and enters the compression chamber for granulation.

Advanced supporting products, such as the N8 counter flow cooler designed by Zhengchang, the 1502d rotary grading screen, and the advanced fine tooth crusher, can be used together to achieve high-quality feed particles