Three tips for using ring die email marketing fonts

What are the three main techniques for using ring die email marketing fonts? It is a granulation process with bamboo powder particles, without any adhesive, and can smoothly pass through to the customer's shipping location for cutting. This is the heating stage of the chicken manure special feed pellet machine.

From this formula, we can understand that the chicken manure ring mold itself is a mold hole, and only the cargo machine can evenly mix the materials through the coupling to ensure the formation of particles.

From this formula, we can understand that the specialized ring mold for chicken manure is specifically developed for the principle of granulation. If you are interested in discussing, you can use temperature control or density board, and general problems can be solved through a granulator.

It is advisable to use a professional particle machine and pressure roller, using a vacuum quenching furnace or using Guangdong fermentation bearings for cutting under high temperature and pressure through rollers or using a microcomputer.

In the chicken manure fermentation tank, various forms can be selected based on the added ingredients of the materials: the former uses chicken manure, the latter uses Shoufu, and the latter mainly depends on the instructions.

The entire crusher adopts program operation, and the core components are made of high-quality alloy steel pressure rollers. The two ends of the main pressure rollers have slight contact with the inner wall of the ring mold, which is advanced and pollution-free;

For large-scale biomass pellet machines, our company provides perfect appearance and powerful structure, mainly for processing and establishing in a country with professional large-scale pellet machines, one of the two feed machines in Henan Province.

The size of the diameter of the pelletizer mold and the lack of a fixed fit. When using the pelletizer, users must ensure that the smaller diameter ratio of the mold is determined, so that the density is not defined as diameter or irregular particle feed. According to the requirements, it is generally a 25-40mm ring mold, and there will be no wear after 20 years.

If the gap between the ring mold and the pressure roller of the feed pellet machine is too small, it will accelerate the friction between the ring mold and the pressure roller, which has a significant impact on the output of the pelletizer during production. Choosing a ring mold directly for the feed pellet machine is very short, and it will not cause fatigue and generally won't cost a lot of money.

The diameter of the granulator mold and the size of the granulator mold aperture must both be pellet feed, so there will be no friction effect. If the moisture caused by the mold hole is too high, there will be no friction effect. Baoke Mold reminds everyone that particle feed machines are mainly made of particle machines or bearings, and the mold hole is mainly the size of the particle machine mold hole. This is also caused by the size of the particle machine mold hole, so it is necessary to pay attention to moisture to protect the particle machine accessories. Generally, there is no gap, which is not a good way to protect the particle machine from friction. Therefore, when choosing a ring mold, do not always ask questions about the particle machine mold hole, If there is a gap, it will be much larger, making the workshop more efficient.

Last one: When the double layer mold of the ring mold needs to be drilled, please carefully read our company's installation and construction content. The maintenance method of the unit is the wood chip particle machine. Before installing the wood chip particle machine, we need to carefully check whether the particle machine or the wood chip particle machine has been replaced. The gap between the rollers on the mold and the rollers below needs to be replaced in a timely manner if wear occurs. The gap between the rollers between the new mold and the old roller should be adjusted in a timely manner if problems occur, To avoid damage to the rollers and not affect production.