Expansion of the roller shell industry and consumer interaction space

Expanding the interaction space between the roller shell industry and consumers can achieve global high cost-effectiveness; The core technology of the granulator can reach the international advanced level and achieve large-scale growth; The pelletizer is the most ideal compression form for feed mixing operations, with output in the form of W,+Mn+adaptation, and high particle density, which can produce with economic advantages; A granulator is an equipment that crushes eucalyptus, pine, birch, poplar, fruit wood, crop straw, and bamboo chips into sawdust and bran, and processes them into biomass fuel. The granulator is the core equipment for particle production and an auxiliary equipment. However, the working pressure of the granulator is due to different experiences, making the particle mechanism more flexible. Therefore, it needs to undergo high-pressure, high-temperature, and high humidity particle cutting to form. Due to the occurrence of many errors in experienced cutting mechanisms and insufficient experience, the efficiency of cutting has been greatly affected. Of course, there are many specific methods for correcting knife type errors, which also have a significant impact on each cutting tool brand.

The heart hole of the ring mold granulator has stopped rotating, and even under normal production and process conditions, its output and quality cannot meet the expected design requirements. But its heart hole is small and the mold hole diameter is large, which may cause significant suffocation and reduce production costs. In addition, the feeding methods of the particle machine are also various, some with large mold hole diameters and some with small mold holes, but they are all new, which affects the output and quality of the particle machine. Therefore, we provide any suggestions for you here.

The pellet machine ring mold is used to design feed, but sometimes when we purchase, we can find different types of pellet machines. When choosing a pellet machine, different compression ratios can be used. It can be said that the ring mold and pressure roller of the pellet machine are matched.

How to properly maintain the working principle of the ring mold, including whether it is necessary to match the pressure roller of the particle machine with the ring mold? Specification: After actual research and analysis, the ring mold produced by our factory found that the main amount obtained by the ring mold at that time was 1/3 of the diameter of the ring mold. Therefore, this equipment can effectively fix some gaps for future use. If left in a normal wear and tear state for a long time, it can cause abnormal wear and tear in the surrounding environment of the ring mold.

The ring mold is caused by the cutting process. If left in a damp place for a long time, it can cause corrosion of the mold hole, thereby reducing the service life of the ring mold or causing the mold hole to become larger.

When the moisture content of particles is uneven, it can cause wear and mold holes to become larger than normal, thereby affecting the service life of the ring mold.

Suggestion: When selecting the correct ring mold, the gap between the mold holes should be adjusted in a timely manner to ensure normal wear and tear of the particle machine.

Ruiqi Machinery promises to adhere to the use of high-quality steel and undergo multiple processing processes to provide customers with high-quality ring molds and rollers, and promises to equip all equipment with Siemens motors and SKF bearings