High production standard roller shell factory

A roller shell factory with high production standards is a small raw material without electricity, but due to

Efficient drilling technology ensures production capacity and reduces manual labor, resulting in different accuracy.

The efficient built-in device reduces the fault principle of the gearbox, prolongs the service life of the mold, and reduces the cost of manual operation.

Efficient particle crushing manufacturing greatly improves the service life of the mold, which is also the basic guarantee for feed particles.

Feed pellet machine, divided into ring mold feed pellet machine, flat mold feed pellet machine, and roller feed pellet machine; According to usage, it can be divided into: small household pellet feed machine, poultry pellet feed machine, small poultry pellet feed machine, fish pellet feed machine, rabbit pellet feed machine, pig pellet feed machine, straw pellet feed machine; According to production, it can be divided into: straw feed pellet machine, wheat bran feed pellet machine, soybean meal feed pellet machine, corn straw feed pellet machine, sawdust feed pellet machine, etc. Various feed pellet machines are classified based on their appearance and production methods.

The particles have axial or radial cracks, and the pulverization rate is high, resulting in low production. The reason for this phenomenon can be that the quenching and tempering temperature cannot be reached, and the material ripening degree is poor. Therefore, the quenching and tempering temperature should be increased to increase the amount of steam during quenching and tempering; It is also possible that the cutting blade is located far away and blunt, causing the particles to be shortened or torn rather than cut off;

The surface of the particles is not very smooth and the pulverization rate is high, which may be due to the small compression ratio of the ring mold. The compression hole should be increased for ring mold compression;

When the particle moisture content is high, the production yield is low and there is often a blockage phenomenon. The pressure reducing valve can be adjusted to increase the steam pressure entering the conditioner and enable the drain valve to play a drainage role;

If there is a blockage or an eccentric shaft driven by a belt, the gap between the conical pressure rollers is 77, and the effective tempering temperature of the drain valve is extended by 5-7. When the particles dry and crack, do not use your hands to reach in to avoid causing the drain valve to malfunction;

When the particle moisture content is high, the production output is low and there is often a blockage phenomenon. The pressure reducing valve can be adjusted to ensure that the conditioner has an overload protection device. Of course, there is also information on preventing overload production, and the department will strongly support and ensure responsibility