The most powerful distributor of flat dies

The most powerful distributor of flat dies.

Today, I am the director of this market in 2050, shipping your information for the VIV series and updating your configuration.

The VIV series vertical ring mold particle machine has made significant progress in our company's research in the field of automation. Through testing from counties to Jiangsu Science and Technology Product Group, we have achieved higher particle units.

Brief Introduction of Sawdust Granulator The sawdust granulator produced by the company absorbs the essence of domestic and foreign granulators. The heart part is a "two-layer mold" with unique assembly structure, and the "pressing wheel" is refined from high alloy wear-resistant materials, with unique design, reasonable structure, energy reduction, long life and other characteristics; It has filled the gap in vertical feeding of national environmental mold granulation and reached the international advanced level. The sawdust granulator is suitable for pressing materials that are difficult to bond and shape, such as rice husks, Sunflower seed shells, peanut shells and other melon shells; Various wood scraps such as branches, trunks, bark, etc; Various crop straw; Various chemical raw materials such as rubber, cement, ash, etc.

Product Introduction: With the rapid development of China's construction industry, there are many waste building templates on the market. Generally, the templates are crushed and used as fuel for biological power plants. However, this method has low profits and consumes a lot of electricity to crush the old templates. Due to the nails on the templates, they are also prone to fracture and deformation. Therefore, the market emphasizes stainless steel plates, which are usually crushed into shapes other than nails. This is to understand the working principle of machines,

Having a professional after-sales service team is essential for the company's product quality to better leverage internal talent and achieve superior product quality. Being able to maintain a stable working environment for a long time is the core business of an enterprise.

If there are any problems during the open-loop mold processing, they need to be solved, and the production of the agent number is high, because there is a problem with the shredder surface.

The oscillation type often causes the phenomenon of open loop mold during the open loop mold, which can lead to many cracks on the working surface of the open loop mold. This phenomenon is usually a problem and may not be solved.

In the process of opening the ring mold, it was thought that it was very simple, but later on, the less attention was paid to whether this problem was discovered, and many accidents occurred. At this time, we should address these issues.

The ring mold is one of the main components of the particle machine, and to a large extent, there are problems that can be avoided. So how to improve the output of the ring mold?

If the yield of pellet feed is not very high, this problem is likely to lead to an impact on the yield of pellets. If it weren't very big, this problem would be even more serious.