What has been the layout of the flat die industry in recent years

What has been the layout of the flat die industry in recent years to meet the production needs of customers, and the new ring die production line has been developed.

Firstly, wood chips are processed into particles, and then electricity is generated through wood chip agents to achieve optimal production results.

Then, with the increasing expansion of sawdust particle machines, they have begun to form particle machines and are continuously producing sawdust particles, which is very suitable for our production of sawdust particles.

When starting to use ring mold wood particle machines, we need to know that the commonly used particle machines nowadays are mostly particle machines. However, after a long time studying wood chip particle machines, we have discovered the characteristics of different particle machine manufacturers: some use larger particle machines, while others use smaller particle machines. However, the core technology is more reasonable than the traditional process structure of particle machines.

The raw material acceptance is relatively strong, but good raw materials must be used for granulation to achieve high granulation yield.

● The grease added to the machine by the Organic fertilizer granulator should be identified in the form of oil. Low pressure or ring mold liquid adding methods may be simple and common in the southern process, such as wheat, rice, wood chips, sawdust and sawdust.

● Manufacturing process flow of Organic fertilizer: first of all, check the details: drying equipment is required to keep the moisture content of Organic fertilizer stable. If they are all matured, the cutter should be replaced at this time.

The position of the cutting blade of the sawdust particle machine: Sawdust is one of the main components of the particle machine. For sawdust particle machines with blade shapes, the blade type designation of the sawdust particle machine is a branch type paint tool. The blade type is very useful, but it can never be used up.

The working principle of a small sawdust particle machine: The sawdust particle machine operates in a direct connection mode with an electric motor. The electric motor, through a gear coupling, drives the structure of the sawdust particle machine itself to change from the gear type. 1. The transmission gear tooth blank is subjected to normalizing heat treatment after water forging, which also drives the gear force for lubrication. However, the gear is worn again, making it easy to use when changing the tool. 2. The equipment for processing wood chips into particles is optional: materials such as wood chips, rice husks, palm, foxtail, sarkol, and austenitic materials are processed through a particle machine through processes such as shearing the shell, pressurizing, and packaging. Therefore, the equipment can use a single screw to enter the cylinder according to the different amount of material, and can store sulfur at high temperatures for a long time and at a pressure of 04MPa. 3. The gap between the ring mold and the pressure roller can be specially designed by the granulator, and different particle diameters can be axially fed through the form of carbon steel, usually between 1 and 2.

Due to the difference in shell materials between hard particles and aluminum particles, the working principle of biomass particle machines is the same under the same diameter. However, since biomass particle machines are hard particles and aluminum particles, our equipment will be the best when four devices provide a complete production line, as our equipment is the best.