This is the roller shell you really need

This is the roller shell you really need.

It is an issue that we have always been concerned about. If we are the object of releasing constraints, then we need to solve it. After many days, we will have many problems, such as how to improve in the backyard. At this point, we need to throw wood chips out in a timely manner to avoid unnecessary trouble.

The problem that often occurs is the sawdust granulator itself, which can feed through a set of fineness and mix materials into the area, resulting in a significant reduction in production and also affecting the granulation yield. That's why such a situation occurs. We need to move it back in a timely manner to avoid directly smashing the entire granulator component and avoiding the negative feedback from screening personnel during illegal operations.

Working principle of the ring mold granulator: the sawdust granulator is operated in the direct connection mode of the motor. The motor is connected with the reducer shaft through a tooth coupling to drive the ring mold granulator shaft to drive. The load wheel inside the ring mold granulator slides inside and outside. The transmission part of the whole machine uses high-quality bearings to ensure efficient, stable and low noise transmission. The ring mold granulator is composed of an electric motor, a reducer, an electric motor, an electric motor, and an electric motor.

The main motor has a power of 90kw and adopts physical pressing, with a production rate of 1:15-15T/H. Under the same energy consumption, there is a significant difference in production. But if the power is adjusted to: 1. 90kw, it adopts physical pressing and amino acid binding, significantly improving the service life of the motor.

Advantage 1: Adopting high-precision involute cylindrical helical gear for direct transmission, with a transmission efficiency of over 98%.

Advantage 2: After water forging, the transmission gear tooth blank undergoes normalizing heat treatment, which improves the hardness of the tooth surface; The tooth surface is treated with carburization, and the carburized layer reaches a depth of 24mm to enhance wear resistance and extend the service life of the components; The hard tooth surface is treated with a silent precision grinding and trimming process, making operation quieter and smoother.

Advantage 3: The main shaft and connected hollow shaft are made of imported alloy structural steel from Germany, which has undergone water forging, rough turning, heat treatment, precision turning, and precision grinding. The structure is reasonable and the hardness is uniform, improving the fatigue resistance and wear resistance of the components, providing a more reliable guarantee for safe operation.

Advantage 5: The bearings and oil seals used in the transmission part are both high-precision bearings imported from Japan and wear-resistant and temperature resistant fluororubber oil seals imported from the United States. Additionally, a lubrication and return system is specially added, with oil circulation cooling and automatic timed oil lubrication. Ensure sufficient lubrication of bearings for safer and more reliable operation.

Advantage 6: The bearings used in the particle forming system are all high-quality silent bearings, and a thin oil circulation cooling and lubrication system is added, resulting in a longer service life and safer operation of the bearings.

Advantage 7: The ring mold is made of high-grade stainless high nickel steel with precision manufacturing, and its unique compression ratio design is reasonable, resulting in better product quality and longer ring mold service life, greatly reducing labor intensity.

Advantage 7: Biomass sawdust granulators have undergone hundreds of experiments and demonstrations, while horizontal, double layer, and biomass sawdust granulators have undergone hundreds of experiments and demonstrations. They can all be independently rotating or dual axis paddle type mixers and can be moved for operation.