If you want to do a good job in the roller shell foreign trade industry, you must grasp these points well

If you want to do a good job in the roller shell foreign trade industry, you must grasp these points well. This project usually includes alloy steel (stainless steel), and without professional equipment, this project will be different.

Notes: 1. Each shift must have a qualified screen surface (referring to the use of conical ring molds), and it should be noted that each shift must have a qualified screen surface (including the responsible material warehouse). If there is no material management, it should be cleaned from the following points: 1. Material warehouse; 2. Feeder.

The feeder should be a particularly large feed pellet machine, which is composed of two sets (inner), two sets (outer), three layers of modulators (including raw materials and feed silos), and flippers.

The feeder should be of the paddle type, consisting of a variable frequency motor and a reducer. It is formed by squeezing two large groups of high-efficiency refrigerants in the granulation bin. Its additives are largely used through the action of pressure rollers and ring molds. This lubrication method can reduce a large amount of dust and complete the main mission of particles.

Requirements for materials entering the granulation room: The proportion of materials is generally between 1-3, and they are all granular materials. If they are added from the mold, they are mainly raw materials, so there needs to be a certain extrusion cost. If it were added from the mold hole, everything would be well explained. Currently, there is a significant gap in our granulation system. There are many places where the materials are blocked, so it is important to be careful not to let the materials rise during drying, which has a significant impact on our production and quality.

What does the feeding port of the granulator go through in many aspects, such as whether the friction between materials is necessary? When the material passes through the mold hole, the granulator will automatically increase a lot, or the new granulator added from the mold hole does not pass, resulting in the granulator not being able to discharge normally. It should not malfunction again after a period of operation.

The ring mold is one of the main components of the sawdust particle machine, which greatly affects the production capacity and output of the machine. Therefore, the selection of the ring mold is important for the use of the sawdust particle machine. When selecting the ring mold, the key is to choose suitable mold holes and slightly larger development, so that the output and quality of the material are related. If the ring mold is selected, it needs to undergo a period of digestion and absorption to improve production efficiency. 2. The key to selecting the ring mold is to choose the appropriate mold hole and its length to ensure the strength and granulation quality of the ring mold. 3. The key to selecting a ring mold is to choose the appropriate mold hole and its length to ensure the yield of the ring mold and the quality of granulation. 4. The key to selecting the ring mold is to choose the appropriate mold hole and its length to ensure the specifications of the ring mold and the quality of granulation. 5. The key to selecting the ring mold is to choose the appropriate mold hole and density, as well as the length of the mold hole, to ensure the normal operation of the particle machine.