Serve the Roller Shell Market Consumers with Care

Serve consumers in the roller shell market with dedication.

Jiangsu Zhengyi Machinery has always used the classification of flat mold granulators or dual shaft mixers while receiving praise and quotes from numerous customers in the market. As a result, customers' recognition of product quality will become even stronger. So how can we make the product quality and smoother

What components can be used for any shell such as screws, screws, worn shafts, rollers, etc?

The sawdust pellet machine is mainly used to crush eucalyptus, pine, birch, poplar, fruit wood, crop straw, and bamboo chips into sawdust and bran, and process them into biomass fuel.

Fuel granulator, also known as sawdust granulator, sawdust granulator, straw granulator, corn straw granulator, biomass granulator, rice husk granulator, Manure granulator, feed granulator, and straw coal briquetting machine.

Many people believe that biomass pellet machines are easy to break, but they are not. We need to act like what the market says, although this is also true. In fact, if you enter a relatively large production organization, but the capacity and capacity of the door are different.

Biomass pellet machine is a pre-treatment equipment for biomass energy. The wastes from agricultural and forestry processing, such as sawdust, straw, rice husk, bark and other biomass, are mainly used as raw materials. Through pretreatment and processing, they are solidified into high-density Pellet fuel. Biomass pellet machines are divided into flat model biomass pellet machines and circular model biomass pellet machines.

The biomass particles produced from the straw granulator are easy to compost, and many users would think of the environmental model biomass granulator before use. However, after the solution transformation, many users have solved this problem. Today, we will take a look at how to transform the granulation equipment.

The spindle bearing has a long service life, usually using lubricating oil and thin oil. Today, many times it is produced by digesting and absorbing soybean meal, and the iron ring molded roller assembly can form particles.

The hoop often slips, the surface of the pressure roller is uneven, or the crushing rate is high, or even cannot form particles, which can lead to a decrease in production costs. This problem indicates the internal hardness of the particle machine. If the foundation is important, this problem indicates that the local spindle bearings inside the particle machine are not damaged, and there are many damage instructions for the complete equipment.

If there is a problem with the cross shaft or a low output, it indicates the cause of damage to the particle machine. Understand the symptoms of the particle machine pressing the rod. If installed properly and the equipment cannot function properly, its production capacity will be very poor. Therefore, we should pay attention to the failure of the biomass particle machine, which is the motor current. We may also encounter some such failures, so we should pay attention to the failure of the biomass particle machine.

The maintenance method for the particle unit is the dismantling method for the circular mold particle machine. The inspection items for the wood chip particle machine before installation are the main characteristics of the particle unit. How to improve the output of the wood chip particle machine.