These new regulations for roller shells have officially been implemented

The purpose of these new specifications for cylinder shells is to control the size of the ring mold and the size of the granulator with a rotating cylinder. There are many materials in the cylinder, such as rice husks, Sunflower seed shells, peanut shells and other melon shells; Various wood scraps such as branches, tree stems, bark, etc; Various crop straw; Various chemical raw materials such as rubber, cement, ash, etc.

Under the power of these granulators, after a period of running in, the vertical ring mold granulators have achieved automation, and the quality characteristics of these granulators have also changed. For example, their particle surfaces are smooth, but the internal looseness hinders material flow, and the surface of the drum 1 presents many cracks. This phenomenon is very obvious. Generally, particles do not separate slowly due to temperature changes, and the surface of particles generally cracks due to high temperatures, However, some fineness can cause surface wear, which indicates that our granulator uses high-quality flat mold granulators without bearings and with high growth temperatures. This phenomenon can be treated by processing sawdust at the lowest point, and the sawdust on the sawdust can also be treated by sawdust. The diameter of the sawdust is 6-8mm, which is composed of bearings below 4mm, These sawdust are mainly produced from sawdust billets and crushed for processing. If the raw materials and finished products match, the yield can also be treated through sawdust billets.

Our sawdust granulator effectively solves the problems of difficult granulation of biomass coarse fibers and poor performance. The main drive adopts a belt drive, the ring mold adopts a quick release clamp type, and the feeding adopts variable frequency speed regulation to ensure uniform feeding. The door cover is equipped with a forced feeder, and advanced manufacturing technology can be used to customize high-quality molds for various raw materials for your various granulators, extending the service life of your equipment, improving product quality, and reducing ton consumption costs.

Our sawdust granulator is an important product of sawdust granulator. There are many common sawdust granulators on the market now, such as flat mold granulator, ring mold granulator, transmission system, pressure roller granulator, vertical ring mold granulator, etc. Our granulator has long technology and can produce various types of particles, including single screw granulator, double screw granulator, water-cooled strip granulator, sawdust granulator, disc granulator, etc. According to actual needs, Optional options include single screw granulators, double screw granulators, countercurrent coolers, crushers, etc. Based on actual needs, choose a suitable saw powder granulator for sawdust granulation. The granulator of the twin screw granulator includes a water-cooled strip granulator, which occupies the space of the sawdust production line and can only survive without the permission of the sawdust granulator. The cutting machine and double screw granulator of the water-cooled strip granulator can be used for sawdust granulation. A suitable pelletizer can produce a machine that integrates the production line and the mesh. It is non adhesive and cannot be discharged immediately. Use a pelletizer that is easy to clean.