Development Trend of roller shell Industry in the Next 10 Years

The development trend of the roller shell industry in the next 10 years.

How to find efficient customers to abandon the operation rack for inner circle materials? The material enters the position and is evenly distributed in the circumferential direction by adjusting the disc. The replaced material is cleaned and replaced to ensure that after entering the silo, it is adjusted to the silo through a pressure roller.

Main business: Particle, natural material, electronic, vibrating screen 3-6mm, the unit is used to develop wet powder into the required particles, and can also crush blocky dry materials into the required particles.

The output of this unit is 15w-150g/H, using a sawdust pellet machine. The natural material and water content are made from corn, soybean meal, straw, straw, rice husk, and other raw materials. After crushing the raw materials, they are directly compressed into pellet feed.

This unit consists of a screw conveyor, a feeding port, a transmission system, a pressure roller, and a ring mold surface using a screw conveyor. There are two adjustment zones on the side for easy material feeding and surface cooling. Suitable materials can be selected according to the actual needs of users.

The host is an irregular structural composition, mainly including: materials, crushing equipment, drying equipment, biomass particles, 3DWP series ultra-fine crusher, systems 1 and 5, 3 and 4, vertical ring mold particle machine, mechanical complete equipment, electrical control system, etc.

Applicable raw materials of biomass particles: peanut shells, bagasse, straw, sawdust, wood chips, Used coffee grounds, rice husks, sunflower shells, cotton stalks, tobacco residues, mustard stalks, bamboo, jute residue, tea residue, wheat straw, palm shells, bean shells, coconut shells, palm silk, drug residue, etc.

Advantage 1: Adopting high-precision involute cylindrical helical gear for direct transmission, with a transmission efficiency of over 98%.

Advantage 2: After water forging, the transmission gear tooth blank undergoes normalizing heat treatment, which improves the hardness of the tooth surface; The tooth surface is treated with carburization, and the carburized layer reaches a depth of 24mm to enhance wear resistance and extend the service life of the components; The hard tooth surface is treated with a silent precision grinding and trimming process, making operation quieter and smoother.

Advantage 3: The main shaft and connected hollow shaft are made of imported alloy structural steel through water forging, rough turning, heat treatment, precision turning, and precision grinding. The reasonable structure and uniform hardness improve the fatigue resistance and wear resistance of the components, providing more reliable guarantees for safe operation.

Advantage 5: The bearings and oil seals used in the transmission part adopt high-precision bearings and wear-resistant and temperature resistant fluororubber oil seals, and a special lubrication return system is added, with oil circulation cooling and automatic timed oil lubrication. Ensure sufficient lubrication of bearings for safer and more reliable operation.

Advantage 6: The bearings used in the particle forming system are all high-quality silent bearings, and a thin oil circulation cooling and lubrication system is added, resulting in a longer service life and safer operation of the bearings.

Advantage 7: The ring mold is made of high-grade stainless high nickel steel with precision manufacturing, and its unique compression ratio design is reasonable, resulting in better product quality and longer ring mold service life, greatly reducing production costs.