Disruptive things emerge in the roller shell industry

The emergence of disruptive things in the roller shell industry usually occurs in actual working conditions, including breakage.

Use oil pressure on the most needed ring mold machinery to ensure that the dimensions and mold holes are arranged neatly, and the size can meet the requirements of the material. At the same time, it produces mold holes, but through the action of mold holes. Hardness will produce discharge, but discharge will also deform accordingly, so it is important to pay attention to wear resistance and use oil as the main tool for cracking ring molds.

The material lubricated by the oil pump is subjected to carburization treatment on the gold shaft at the lubrication point, which will generate a significant oil temperature. However, after drilling out, the oil pump will not be easily squeezed out. Therefore, timely lubrication of the material is necessary, which will also increase production.

● Under the condition of using recyclable materials, on the basis of wearing parts such as spindle, sheet, Flat noodles, etc., they must have good quality and structure. If the raw materials are sufficient, they must be able to effectively reduce the causes or the lack of effective methods to improve the quality and efficiency of the granulator.

After cleaning the raw materials, the cleaning time must be minimized as much as possible, and materials must not be allowed to enter and must be recycled first.

Classification: Straw pellet machines are divided into flat mold pellet machines and ring mold pellet machines. Ring mold granulator refers to equipment that uses eucalyptus, pine, birch, poplar, fruit wood, crop straw, and bamboo chips to crush into sawdust and bran, and process them into biomass fuel. Effectively solving the shortcomings of difficult granulation and poor effect of coarse fibers, adopting international advanced manufacturing processes, customizing high-quality molds for various particle machines, prolonging equipment life, improving product quality, and reducing per ton consumption costs.

For straw pellet machines, although the operating methods are all the same, a unit plays an important role in ensuring the production quality and product quality of the straw pellet machine. The significant impact lies in the production capacity of the straw pellet machine.

During the production of straw pellet machine production line equipment, regardless of the type of equipment, as long as it is a straw pellet machine, it has a shaking effect, low adhesion and failure rate, which will cause the straw pellet machine to press rollers, ring molds, etc., and not complete the cutting operation of the straw pellet machine, resulting in low yield of the straw pellet machine and even inability to press particles;

The gap between the pressure roller ring mold of the straw pellet machine should not be too small, which may cause the compression degree of the straw pellet machine to be too small, and also damage the bearings of the entire machine. Therefore, we suggest that when using the straw pellet machine, first use oil to distribute the contact surface of the pressure roller to prevent the pressure roller from slipping, then use oil to guide it through the pressure roller, and then loosen the contact surface of the pressure roller to prevent it from rotating.

The method of maintaining the motor of the particle machine is to introduce the knowledge of the three steps of the operation of the wood chip particle machine. The reason for the burst of the ring mold of the particle machine is analyzed. What are the symptoms before the particle machine malfunctions? The corrective methods for the defective phenomena of the particle machine