Points of Attention for Compression Ratio Selection of Ring Modules

Once the ring mold such as China Pellet Ring Dies has sunk holes, there will be uneven particle size. Therefore, there are some points that need to be paid attention to:

1. Try to choose small particle type for milk pig production

2. For particles with uniform length and length, medium and small models should be selected for production (or the thickness of circular mould should be reduced).

3. If the particle length is required, the hole opening rate of ring mold should be reduced; if the particle length is short, the hole opening rate should be increased

4. The length of particles is short with high linear speed and long with low rotating speed

5. For pig granulation, the compression ratio of circular mould is not recommended to be 1:3 or 1:3.5, but 1:4 compression ratio and 1:5 compression ratio actually

The particle has a limited hardness difference (the hardness tester may not be able to detect), a higher compression ratio or the first result

Hardness change is extremely limited!

We are Biomass Granulators Roller Shell Supplier. We aslo supply all kinds of Pellet Ring Dies. If you have demand about our products, welcome to visit our website know more details about our products such as Biomass Feed Pellet Roller Shell and more!